The FLARE Solar Smart Streetlights lead the way with Solar/LED lighting technology.
Offering an industry first, integrated Energy Management System (EMS) which allows the unit to operate for up to 8 days in low sunlight periods, with an approximate 2.5 night cycles of stand alone autonomy once fully charged.
We have designed the Flare Solar Smart Streetlights to active via low light and stay on for 10 mins. Should not motion be detected within the 10 min period, the unit will drop to 30% of its brightness indefinitely. Should movement be detected, then units will return back up to full brightness and the cycle will repeat.
Complete with highly efficient mono-crystalline silicon solar panel and in-built, replaceable Lithium-ion long life battery, the FLAR fittings are leading the way with solar/LED lighting technology.
The Flare units are also available with in 240 V back up system allowing the unit to be charged by the power backup if in the event that we had a prolonged low light period. This can insure AS/NZ compliance if that is a site requirement.
IMPORTANT – These units are solar operated. They do need some time for their initial charge. If your installation requires light immediately, we would recommend unboxing the units, turning them on with the remote-control and leaving them in direct sunlight for 2 – 3 days prior to your installation. At the end of each day you will need to turn them off again to ensure they do not operate at low light. If you install these products without an initial charge and during a low light, overcast period, they may not last through the night until they have had ample time to charge.
|Voltage||Wattage||Power Factor||Beam Angle||Colour||Life Cycle|
|–||MIXED||>0.95||145 / 65||5000k||60,000 Hrs|
|IP Rating||Function 1||Function 2||Motion Sensor||Dimmable||Heat Rating|
|IP66||100% Brightness – 10 mins||30% – Indefinite||Yes – Standard||Yes||-30˚c to +55˚c|